ClareVision Fixed Lens Dome Reset Button and SD Card Slot Location

This article shows how to access the reset button and micro SD card slot on Fixed Lens Dome Cameras.

 


Supported Dome Cameras:

CLR-V200-4D28(W/B)

CLR-V200-8D28(W/B)


 


How to Access the Reset Button on a Fixed Lens Dome

  1. The Reset Button is located under the protective dome of the camera. Unscrew the three security set screws using the included alan key and carefully remove the dome cover.

    Dome_Camera_Cover_Removal
  2. The Reset Button is located on the main PCB board below the camera mounting structure.

    Dome_Camera_Reset_Button_Location
  3. Reset the camera by holding down the Reset Button for 10-15 seconds. Camera must be powered on.
  4. Replace the protective dome and screw in the original screws.
  5. Done!

 


 


How to Access the Micro SD Card Slot on a Fixed Lens Dome:

  1. The Reset Button is located under the protective dome of the camera. Unscrew the three security set screws using the included alan key and carefully remove the dome cover.

    Dome_Camera_Cover_Removal
  2. The Micro SD Card slot is located on the main PCB board below the camera mounting structure.

    Dome_Camera_SD_Card_Location
  3. Press on the Micro SD Card to eject it.
  4. Press a replacement Micro SD Card into the slot until it firmly locks in place.
  5. Replace the protective dome and screw in the original screws.
  6. Done!

IMPORTANT: We recommend only ClareVision Micro SD Cards be used with ClareVision cameras. Non-Clare branded Micro SD cards may not meet the performance requirements for optimal operation.


Last Updated: 05/25/2022