ClareOne Security and Smart Home Platform
ClareOne is redefining what it means to live in an intelligent home. The panel sets the bar by combining professional wireless security with full-featured home automation into a single, robust touchpanel.
The ClareOne Wireless Security and Smart Home 2:1 Kit is the ideal starter security package. The 2:1 Kit includes the ClareOne panel, 2 wireless window/door sensors, and a PIR motion sensor.
ClareOne Panel Quick Start Guide
ClareOne Panel User Manual
ClareOne Panel Datasheet
Mini Door/Window Sensor Installation Sheet
Mini Door/Window Sensor Datasheet
Motion Sensor Installation Sheet
Motion Sensor Datasheet
The ClareOne Auxiliary Touchpanel allows your clients to arm, disarm, monitor, and interact with their smart-home and security system. The Touchpanel offers a unique, standalone security interface with additional controls for smart-home features. Installation is easy using the supplied wall mount bracket or can be placed on a counter-top.
The Touchpanel works with existing Clare security systems that feature either the ClareOne Wireless Security and Smart Home Panel or a Legacy CLIQ controller and Clare Security Panel.
The ClareOne 16-Zone Hardwired Input Module enables existing wired security sensors to communicate with the ClareOne Panel. The module is universal and can be used with any existing hardwired zone.
The ClareOne Wireless Repeater/Translator is a battery backed up device that either extends the wireless range of ClareOne security sensors or translates most existing legacy wireless security devices to ClareOne encrypted protocols.
When functioning as a translator, it enables the ClareOne Security Panel to receive signals from Honeywell® 5800 series, 2GIG®, GE®, Napco®, DSC® legacy, Qolsys®, or Interlogix® sensors. This reduces equipment and installation costs by not having to remove or replace, previously installed sensors.
The repeater/translator is universal and can be programmed to the correct transmitter protocol compatibility during the installation process.
The ClareOne Mini/Door Window Sensor is a magnetic sensor device designed to fit seamlessly alongside a door frame or window sill. When the door or window are opened, the magnetic contact is disrupted, and the sensor transmits an alarm notification to the ClareOne panel.
The ClareOne PIR Motion Sensor is designed to fit seamlessly in the corner or the room or alongside a wall/door. When the PIR senses motion it transmits an alarm notification to the ClareOne panel.
The ClareOne Wireless Ceiling Mount 360º Motion Sensor was designed to be mounted on ceilings while offering a 360º passive infrared motion detection area coverage. The motion sensor features a small form factor of only 2.95x1.39 inches, allowing for discrete installation, as well as an extended battery life of up to 4-6 years.
The ClareOne Door/Window Sensor with shock sensor provides complete intrusion protection for windows. The sensor detects both a contact opening and shock/impact.
The ClareOne Door/Window Sensor with external contact is a magnetic sensor device designed to fit seamlessly alongside a door frame or window sill and is resistant to magnetic tamper and defeat. The sensor features terminals that allow connection for external input.
The ClareOne Recessed Door/Window Sensor is a magnetic sensor device designed to fit seamlessly inside a door frame or windowsill and is resistant to magnetic tamper and defeat. A high–powered Microchip delivers exceptional range -no "dead spots" or signal drop-offs. An isolated spiral antenna provides much greater RF surface area to improve range . The antenna is mounted above the board and separated from batteries contributing to the superior RF performance and transmission efficiency.
The ClareOne Outdoor Door/Gate Sensor is a magnetic sensor designed to be used outdoors on gates, storage crates, and garage doors. Featuring a patented design with an isolated antenna, the sensor supports a longer wireless range and can be mounted on metal or wood surfaces.
The ClareOne Rate of Rise Heat Detector uses electronic processing to detect and report rising heat conditions. The detector can be mounted almost anywhere to detect a rise in heat conditions.
The ClareOne High/Low Temperature Sensor is a supervised, wireless sensor that detects both a high temperature (100° F) and low temperature (40° F). The sensor is mounted using double-sided adhesive tape (included).When triggered, the sensor transmits an alert or status to the ClareOne panel if the temperature threshold is exceeded.
The ClareOne Carbon Monoxide Detector is a battery powered wireless detector that communicates with the ClareOne Panel. The detector consists of an electrochemical CO sensor and a wireless transmitter.
The ClareOne Smoke Detector has a built-in wireless transmitter and detects the presence of smoke. When smoke is detected, an alarm sounds and sends a signal to the ClareOne panel.
The ClareOne Z-Wave Indoor Siren extends the audible security alarm tone to additional areas of the home. The siren supports Z-Wave plus, and features visual alerts from 3 front-facing LEDs.
The ClareOne Water Detector senses the presence of water and notifies the ClareOne panel. This device is great for installing under sinks, near washing machines, or at a hot water tank.
The ClareOne Keyfob is a battery operated wireless handheld alarm sensor. When a button is pressed, the associated alarm is sent to the ClareOne panel.
The ClareOne Panic Pendant (Keyfob) is a wireless hand-held device that can be used as a portable panic button or line-safety device. The pendant features powerful, exceptional range and has a long lasting battery.
The ClareOne Glass Break Detector is a ceiling or wall mount sensor that detects and communicates the sound of breaking glass. The detector provides a maximum detection range, and can sense sound in a 360º pattern.
This power extension kit can be used with the ClareOne Auxiliary Touchpanel to extend power when installed out of reach of a power outlet. Installation is easy and quick with color-coded quick-snap ports that can be used with CAT5 or a better extension cable.
The ClareOne Door/Window Accessory Kit includes replacement parts for the ClareOne Mini Door/Window Sensors.
Use this kit to replace the existing ClareOne panel's tabletop stand or wall bracket in case of damage or loss.
This battery is a direct replacement for the ClareOne Panel's original battery. When hooked up to a power source, the lithium battery can be recharged to provide up to 24 hours of additional backup power to the ClareOne Panel during a power outage. Installation is quick and easy, simply remove the panel’s back cover plate and replace the battery by disconnecting the power connector.
This 12-volt power supply is a direct replacement for the ClareOne Panel's original power supply. It plugs into the back of the panel via micro USB or wired terminals.